Step 15
Fit the second side track
- The side tracks are pre-drilled and have wall pile on the outside to seal as they push against the reveal.
- Press the track down onto the reveal as you screw it — that blocks light along the edge.
- If the reveal isn't perfectly straight and a track wants to twist, hook one of the little spacers from the pack behind the screw to bring it back flush with the front of the pelmet.
Recommended troubleshootingCommon questions for this step
What are the little spacers for?
If a reveal isn't dead straight, a spacer hooked behind the screw twists the side track back so it sits flush with the pelmet front.