Bedroom · 100% Motorised Blackout Blinds
Australia's Best
Bedroom Blackout Blinds.
Streetlights, sunrise, screens — we seal every edge of the bedroom window, so dark stays dark.
Book your in-home visit.
- 100% blackoutEvery edge sealed dark
- Child-safe cordlessNo cords, no chains
- Smart-home compatibleGoogle, Alexa, Amazon Home
- Money-back guaranteeOrder with confidence
Bedroom blackout blinds, fitted and installed across Adelaide, Melbourne, Sydney, Perth, Brisbane and the Gold Coast — or DIY kits shipped Australia-wide.
“Best decision we made. The whole room actually goes dark.”
- Wake when you want, not when the sun does.
- Stop the streetlight from cutting in.
- Quiet motorised control — no chains, no cords.
- Looks clean. Feels finished.
Before
AfterThe bedroom problem
The bedroom problem isn't fabric.
It's edges.
Standard blockout blinds dim the fabric. They don't darken the room. Light still gets through at the sides and the top — which is why summer sunrises and streetlights make it through. By 5am that's enough to pull you out of deep sleep, and the rest of the day is spent catching up. The fix isn't a darker fabric. It's a system that closes the gaps around the window.
- Streetlights cut in around the sides of standard blinds.
- The roller leaves a halo of light above the blind at sunrise.
- The bottom rail sits above the sill, leaving a wedge of morning light that lands on the bed.
- Heavy curtains dim the room but leave gaps at the rail and along the floor.
- Layering curtain over blind compounds the problem because each layer brings its own gaps.
Watch the bedroom actually go dark.
No dimmer. No mood lighting. The same window in the same room — open, then sealed. Drop the blind, kill the light.
Built around the whole opening.
Side tracks, top pelmet, sealed bottom rail and a quiet motor work together to close the four edges where standard blinds and blackout curtains leave gaps. The fabric is the easy bit.
Channels hold both edges of the blind.
Compare the pair
How our blinds stack up against a standard roller.
Both are blinds. Only one is built around the whole window — side tracks, pelmet, bottom rail.
roller blind
Helps reduce light gaps around edges
Complete framed blackout system
Motorised operation available
Cordless and child-safe options
Custom-made to your window
Designed specifically for blackout performance
Better suited for nurseries & shift workers
LimitedDIY installation available
LimitedHelps create a darker sleep environment
Rechargeable motor options available
Cleaner architectural finish
Varies
Bedroom scenarios
Same room, six different bedtimes.
The bedroom isn't one room. It's a kid's room at 7pm, a master at 6am, a shift worker's recovery cave at 11am, and a holiday rental every weekend in between. The system works the same for all of them.
- Sleep through the morning
Sunrise stops at the frame. The bedroom stays the dark it was at 2am, until you decide otherwise.
- Settle the kids
Lower the blind from the doorway — no reaching across cots, no cords anywhere near the bed.
- Whisper-quiet motor
Quiet enough to move the blind from bed without waking the person next to you.
- Streetlights, sealed out
Side tracks close the edge gaps where suburban and city streetlights find every ordinary blind.
- Partners on different schedules
Early starts and late shifts in one bed. Run each blind from the remote without turning on a light.
- Guest rooms and holiday homes
A built-in finish that gives every guest a properly dark room — no instructions needed.
Your existing curtains can stay, too — the system mounts inside the reveal, so the blackout no longer depends on the curtain doing any of the work.
Quick answers.
- The system is designed for 100% blackout. Side tracks run down both sides of the window, the top pelmet covers the roller, and a weighted bottom rail seals against the sill. Fit accuracy decides the outcome, so check window suitability first to confirm your reveal works before you order.
- If light is what's waking you, they're built for exactly that. The sealed frame creates a completely dark room at any time of day — which is why shift workers, parents with babies and light sleepers are the people who use them most.
- Easier than with curtains. The motorised remote means the blind opens quietly without reaching across the bed. No chain pulls or rattle. If you'd like to add SmartHub, you can run schedules so the blind opens at your wake time and stays closed otherwise.
- Yes, slightly. The system includes a ~90 mm top pelmet, space for the fabric to drop (about three fingers' width) and a ~50 mm bottom rail. You'll lose some visible window space — that's what allows the system to fully block light.
- No. The motor is rechargeable, charged via USB-C — typically once per change of season, depending on use. There's no hardwiring required for a standard install.
- Wider openings use multiple blinds side by side. Each blind sits in its own frame, so there'll be a vertical join (centre post) where they meet. A minimum 90 mm reveal is required for this setup.
- Sometimes. The standard MAB system is reveal-mounted with a small number of fixings. Renters usually need landlord approval, or look at the Transforma Retrofit System, a retrofit option designed for less invasive installs that can travel with you. Mention you're renting during the suitability check and we'll talk through what's realistic for your lease.
Adelaide & Perth customers benefit from our Salisbury Plains & Bibra Lake facility with faster turnaround times, personalised service, and top-quality locally crafted blinds.
How it works
Same system, two paths.
Same blackout system, two pathways. DIY ships Australia-wide. Pro install is free to measure across key metros.
Free in-home measure across Adelaide, Melbourne, Sydney, Perth, Brisbane and the Gold Coast.
Where they live
Built for the rooms that need the dark.
Bedrooms, nurseries, theatre rooms, apartments. Tap a room to see the install in context.
Why people switch to motorised blackout blinds.
Short clips from MAB customers in their own bedrooms and nurseries.
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
Where we install
Across key Australian metros.
Professional installation available across key metro service areas including Adelaide, Melbourne, Sydney, Perth, Brisbane and the Gold Coast. DIY kits ship Australia-wide.
Adelaide
SABuilt locally. Installed across SA.
Visit pageMelbourne
VICAcross Victoria, via IntoBlinds.
Visit pageSydney
NSWDirect install across Greater Sydney.
Visit pagePerth
WAManufactured in Bibra Lake. Across WA.
Visit pageBrisbane
QLDAcross South-East Queensland.
Visit pageGold Coast
QLDAcross the Gold Coast metro.
Visit page
What our customers say.
“Wish we had done it sooner. Now the little one can get a good sleep and it helps keep her room cooler in summer months. John and the team were great to deal with and we look forward to having you back to finish off our home.”
“John at Midnight Anytime Blinds was great — really happy with the customer service provided and the blinds are awesome. We're ordering more for other bedrooms we love them so much.”
“Very easy to install and they look amazing. We have just ordered more for our other bedrooms. A++”
“I first got in touch with John, who clearly explained all the details and was extremely professional. The blinds arrived after a few weeks, and converting my existing blinds to motorised ones was incredibly easy. The rail quality is excellent, and everything works perfectly — no light coming through at all. He also provides aftercare service which I thought was good.”
“Great product, great service. From phone call to install only a week and a half. John and Luke were quick with the install, they had a small challenge with our window frame but it was easily overcome. We would highly recommend MAB for service and quality. Best product to turn day into night.”
“Highly recommended. Fair pricing, excellent customer service and fantastic product.”
“Easy install, quick delivery and awesome customer service. Nothing too much trouble. Highly recommend this product and company.”
Finishes
Colours to match the room.
Powder-coated frame finishes and DUO Blockout or LeReve Blockout fabrics. Tap any fabric to see the weave up close, or browse the full range with live pricing in the configurator.
Frame colours
- White
- Black
- Silver
- Cream
DUO Blockout fabrics
- Salt
- Stella
- Aztec
- Basalt
- Calm
- Carbon
- Cumulus
- Dove
- Muse
- Nova
LeReve Blockout fabrics
- Crystal
- Shell
- Chalk
- Concrete
- Graphite
- Marble
- Mink
- Onyx
- Pewter
- Sand
Not sure your bedroom window will work?
Reveal-mount fit generally needs around 70 mm of top depth for a single blackout blind, or 90 mm for a dual setup, plus 30 mm of side clearance and 20 mm at the front edge. If you're unsure — shallow reveal, sliding window, handles or winders in the way — send a photo with rough measurements and the team will confirm before you order.
Two ways to a properly dark room
Pick your path.
Free in-home measure across key metro service areas, or DIY kits shipped Australia-wide. Same system either way.
