Nursery · 100% Motorised Blackout Blinds
Australia's Best
Nursery Blackout Blinds.
Day naps, early bedtimes, 5am summer sunrises — we seal every edge of the nursery window, so dark stays dark.
Book your in-home visit.
- 100% blackoutEvery edge sealed dark
- Child-safe cordlessNo cords, no chains
- Smart-home compatibleGoogle, Alexa, Amazon Home
- Money-back guaranteeOrder with confidence
Nursery blackout blinds, fitted and installed across Adelaide, Melbourne, Sydney, Perth, Brisbane and the Gold Coast — or DIY kits shipped Australia-wide.
“Best decision we made. The whole room actually goes dark.”
- Day naps in a properly dark room.
- No cords, no chains, nothing beside the cot.
- Quiet enough not to wake a sleeping baby.
- 5am summer sunrise stops being the alarm clock.
Before
AfterThe nursery problem
When the room still glows,
the nap doesn't last.
Streetlights creep in around the sides. The early sun cuts in over the top. Standard blockout blinds darken the fabric and stop there — the edges are where most of the light gets through. By the time you've tried foil on the glass, blankets pinned over the curtain rod or towels stuffed into the gaps, the room still isn't truly dark. And the moment light comes back in, so does an early wake-up.
- Streetlights and porch lights creep in around the sides of standard blinds.
- The early sun cuts in over the top of the roller.
- Summer evenings stay bright past 8pm — bedtime starts before dark does.
- Foil, pinned blankets and towels in the gaps still leave a glowing edge.
- The moment light comes back in, so does the early wake-up.
Watch the nursery actually go dark.
No dimmer. No mood lighting. The same window in the same room — open, then sealed. Drop the blind, kill the light.
Built around the whole window, not just over the fabric.
Each nursery system is custom-made for the opening. The blind is one part — side tracks, a top pelmet and a sealed bottom rail do the rest, closing the gaps standard blockout blinds leave behind.
Channels hold both edges of the blind.
Compare the pair
How our blinds stack up against a standard roller.
Both are blinds. Only one is built around the whole window — side tracks, pelmet, bottom rail.
roller blind
Helps reduce light gaps around edges
Complete framed blackout system
Motorised operation available
Cordless and child-safe options
Custom-made to your window
Designed specifically for blackout performance
Better suited for nurseries & shift workers
LimitedDIY installation available
LimitedHelps create a darker sleep environment
Rechargeable motor options available
Cleaner architectural finish
Varies
Nursery scenarios
One nursery, every sleep of the day.
A nursery does more sleep shifts than any other room in the house — morning naps, midday naps, 6:30 bedtimes and the long night stretch. The system holds the same dark through all of them.
- Day naps that last
Midday brightness stays outside. At nap time the room reads night-time, even in the middle of January.
- Bedtime before sunset
Summer evenings stay bright past 8pm. The routine starts when you say it does, not when the sun goes down.
- Nothing beside the cot
No chains, cords or loops. The blind moves by remote, so there's nothing hanging within reach.
- Quiet enough for sleepers
Lower the blind from the doorway, quietly, without standing over the cot or reaching across the change table.
- Streetlights, sealed out
Porch lights, security lights and street glow leak around ordinary blinds. Side tracks close those edges.
- Scheduled for the routine
Add SmartHub and the blind can close 15 minutes before bedtime, every night, on its own.
The system is built to last well beyond the nursery years — the same blind keeps working as the room becomes a toddler's, then a kid's.
Quick answers.
- MAB uses a cordless motorised design. There are no exposed chains, beaded cords or operating loops — the blind opens and closes by remote. That removes a common safety concern in nurseries and family bedrooms.
- Yes. The system is designed for 100% blackout by closing the edges around the window, not just darkening the fabric. The result is a much darker room for day naps and early mornings. We don't claim this will make a baby sleep longer — that depends on your routine — but the room itself will be darker.
- No. The blind uses a rechargeable battery motor charged via USB-C — there's no hardwiring required for a standard nursery setup.
- Yes, if your window is suitable and you're comfortable measuring carefully. Start with the window suitability check, then the measuring guide, before ordering. DIY kits ship Australia-wide with setup support included.
- In most cases, yes. The motorised blackout range starts at around 530 mm wide and 300 mm tall. If your nursery window is smaller or an unusual shape, send measurements and a photo and the team will check fit before you order.
- Yes — a dual blind system pairs a blackout blind with a sheer for daytime privacy and softer light. Dual setups generally need a deeper reveal (around 90 mm at the top). Check window suitability first.
- The motor is designed for bedroom use — quiet enough to operate without disturbing nearby sleep. We don't publish specific decibel figures, but if motor sound is a particular concern for your nursery, mention it at the measure and quote so we can walk through how it sounds in person.
Adelaide & Perth customers benefit from our Salisbury Plains & Bibra Lake facility with faster turnaround times, personalised service, and top-quality locally crafted blinds.
How it works
Same system, two paths.
Same blackout system, two pathways. DIY ships Australia-wide. Pro install is free to measure across key metros.
Free in-home measure across Adelaide, Melbourne, Sydney, Perth, Brisbane and the Gold Coast.
Where they live
Built for the rooms that need the dark.
Bedrooms, nurseries, theatre rooms, apartments. Tap a room to see the install in context.
Why people switch to motorised blackout blinds.
Short clips from MAB customers in their own bedrooms and nurseries.
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
- ★★★★★
Where we install
Across key Australian metros.
Professional installation available across key metro service areas including Adelaide, Melbourne, Sydney, Perth, Brisbane and the Gold Coast. DIY kits ship Australia-wide.
Adelaide
SABuilt locally. Installed across SA.
Visit pageMelbourne
VICAcross Victoria, via IntoBlinds.
Visit pageSydney
NSWDirect install across Greater Sydney.
Visit pagePerth
WAManufactured in Bibra Lake. Across WA.
Visit pageBrisbane
QLDAcross South-East Queensland.
Visit pageGold Coast
QLDAcross the Gold Coast metro.
Visit page
What our customers say.
“Wish we had done it sooner. Now the little one can get a good sleep and it helps keep her room cooler in summer months. John and the team were great to deal with and we look forward to having you back to finish off our home.”
“Easy install, quick delivery and awesome customer service. Nothing too much trouble. Highly recommend this product and company.”
“Very easy to install and they look amazing. We have just ordered more for our other bedrooms. A++”
“John at Midnight Anytime Blinds was great — really happy with the customer service provided and the blinds are awesome. We're ordering more for other bedrooms we love them so much.”
“Highly recommended. Fair pricing, excellent customer service and fantastic product.”
“I first got in touch with John, who clearly explained all the details and was extremely professional. The blinds arrived after a few weeks, and converting my existing blinds to motorised ones was incredibly easy. The rail quality is excellent, and everything works perfectly — no light coming through at all. He also provides aftercare service which I thought was good.”
Finishes
Colours to match the room.
Powder-coated frame finishes and DUO Blockout or LeReve Blockout fabrics. Tap any fabric to see the weave up close, or browse the full range with live pricing in the configurator.
Frame colours
- White
- Black
- Silver
- Cream
DUO Blockout fabrics
- Salt
- Stella
- Aztec
- Basalt
- Calm
- Carbon
- Cumulus
- Dove
- Muse
- Nova
LeReve Blockout fabrics
- Crystal
- Shell
- Chalk
- Concrete
- Graphite
- Marble
- Mink
- Onyx
- Pewter
- Sand
Not sure your nursery window will work?
Reveal-mount fit generally needs at least 70 mm of top depth for a single blackout blind, or 90 mm for a dual setup, plus around 30 mm of side clearance and 20 mm at the front edge. If you're unsure — odd shape, shallow reveal, handles or winders in the way — send a photo with rough measurements and the team will confirm before you order.
Two ways to a properly dark room
Pick your path.
Free in-home measure across key metro service areas, or DIY kits shipped Australia-wide. Same system either way.
